Materials Dealing with Energy UNIT 2
General Description
This energy unit features power up gravity down circuit. Activate the start off solenoid to start the motor to lift the machine. The lowing motion is activated by the solenoid valve using the decreasing pace managed from the strain compensated movement control valve. Merchandise of this series can be widely used in the market of logistic gadgets for instance fork lift, mini lift table, etc.
Special Notes
1. The duty of this energy unit is S3,i.e.,30 seconds on and 270 senconds off.
two. Clean all of the hydraulic components concerned before mounting the energy unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst,which really should also be clean and no cost of impurities, N46 hydraulic oil is proposed .
four. Oil transforming is needed soon after the first 100 operation hours,afterwards when every single 3000 hrs.
five. The electrical power unit ought to be mounted horizontally.

Materials Dealing with Power UNIT one
Standard Description
This power unit is intended for that fork lift industry, consisting of extremely effective gear pump, DC motor, guide increase and reduce valve, tank, ect. The up and down motion are controlled from the lever of your guide release valve, and that is outfitted with an electrical switch to activate the motor. The lowing speed is managed through the strain compensated flow control valve.
Specific Notes
one. The duty of this energy unit is S3, i.e. 30 seconds on and 270 senconds off.
2. Clean all of the hydraulic parts concerned before installation of the power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst, which really should also be clean and totally free of impurities, N46 hydraulic oil is suggested .
four. Oil altering is required soon after the preliminary a hundred operation hours, afterwards once every 3000 hours.
five. The electrical power unit proven is created to be mounted horizontally.