admin

February 5, 2021

Why Coupling Grease?
Sufficient lubrication is important for satisfactory gear coupling operation. Gear Coupling Grease is specifically built for gear coupling applications to improve coupling lifestyle even though significantly lowering upkeep time. Its higher viscosity base oil and tackifier combine to help keep the grease in area and stop separation and it’s in full compliance with NSI/AGMA 9001-B97 lubrication suggestions.
Coupling Grease is dark brown in colour and manufactured which has a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to high centrifugal forces normally observed in couplings. Bearing or common objective greases usually separate and drop effectiveness on account of substantial centrifugal forces over the different elements at higher rotational speeds. These high centrifugal forces encountered in couplings separate the base oil from your thickeners. Heavy thickeners, which have no lubrication qualities, accumulate while in the gear tooth mesh region leading to premature coupling failure. Gear Coupling Grease is developed to very resistant to centrifugal separation of your oil and thickener, which permits the lubricant for being employed for any somewhat long time period of time.
One of the techniques to your success of Gear Coupling Grease may be the variable consistency through the entire working cycle of your application. The consistency of our gear coupling grease changes with all the operating conditions. Working on the lubricant under actual service conditions triggers the grease to come to be semi-fluid, functionally solash lubricating the dress in surfaces of your coupling. Since the grease cools, it returns for the authentic consistency, therefore preventing leakage.
Gear Coupling Grease is accessible from stock in 14 oz. cartridges, 1 lb. and five lb. cans.
Options
Minimizing of coupling dress in
Resistance to water washing
Corrosion and rust safety
Higher load carrying abilities
Extended relubrication frequency
Use at temperatures up to 325° F
Staying in place beneath substantial speeds
Resistance to centrifugal separation
Reduction in down time & maintenance cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and one. This grease is specially formulated that has a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.