Basic bearings provide low-friction sliding contact for relative motion between elements of a machine. They are the simplest type of bearing, without rolling elements, and there are three simple types of basic bearings: radial plain bearings (also known as sleeve bearings or bushings) to support rotating or reciprocating shafts, thrust bearings (also known as washers) to support axial loads on shafts, and linear bearings to aid and guide the motion of parts in a straight line. Flanged sleeve bearings have a flange on one end to aid axial loads. Spherical simple bearings are radial bearings that enable angular misalignment of the shaft. Basic bearings are manufactured from durable, low-friction components such as sintered or cast bronze alloys, plastic material, or a mixture of a metallic shell and a plastic-type bearing surface. They can be lubricated externally or by a lubricant embedded in the bearing material. Plain bearings are found in automobiles, building and mining gear, textile manufacturing devices, and robotics, amongst others.
The maximum bore comes with a typical ANSI/AGMA 9002-B04 or ISO 286-2 keyway.
Taper Lock Bushing mounting screws could be either in . (UNC) or metric (BSW) and care should be taken to choose the proper hub part number.
Taper Lock Busings are a product of Baldor Dodge and so are not included with Lovejoy coupling hubs.
Maximum bores size and torque capacities are per Dodge specifications and Lovejoy is not responsible for the accuracy of the values listed relative to bore size and torque capacity.
Split Taper Bushings. Split-taper bushings are accustomed to mount sprockets, pulleys, and couplings onto shafts. They have a tapered, split body that locks the bushing down onto the shaft, prevents it from slipping during procedure, and transfers more torque.
All reborable bushings are stocked
without sawsplit to facilitatere-machining.
Sawsplit must be made in bushing to allow it to compress for proper gripping of the shaft.
Adapters for TAPER-LOCK bushings are recommended for make use of where it is more convenient to straight bore than to drill, tap and taper bore hubs to support bushings. The adapter can be a gray iron, taper-bored sleeve whichfits into the directly bore of a hub. The bushing simply fits inside the adapter which is definitely tapped for the bushing screws. When tightening the locking screws, adapter can be extended against the hub bore contracting the bushing tightly upon the shaft.
Ever-Power offers an intensive selection of energy absorbing elastomeric isolators that limit the tranny of structure-borne vibration and impacts. Our items are designed for simple make use of and a wide variety of orientations in compression, shear and slanted position loading. While economical, these products are constructed with quality rubber, silicone, Neoprene and steel materials that enable support for the proper quantity of load for every app. Filter through our in-depth product listing of elastomeric products including foundation mounts, glass mounts, bumpers, bushings and grommets to get the right alternative for your Taper Bore Bushing application.

Simple bearings provide low-friction sliding contact for relative motion between elements of a machine. They are the simplest kind of bearing, without rolling elements, and there are three fundamental types of simple bearings: radial ordinary bearings (also known as sleeve bearings or bushings) to aid rotating or reciprocating shafts, thrust bearings (also known as washers) to aid axial loads on shafts, and linear bearings to aid and guide the motion of parts in a directly line. Flanged sleeve bearings possess a flange on one end to aid axial loads. Spherical ordinary bearings are radial bearings that enable angular misalignment of the shaft. Basic bearings are made from durable, low-friction components such as sintered or cast bronze alloys, plastic, or a mixture of a steel shell and a plastic bearing surface. They may be lubricated externally or by a lubricant embedded in the bearing materials. Plain bearings are used in automobiles, construction and mining apparatus, textile manufacturing apparatus, and robotics, amongst others.
The maximum bore is supplied with a typical ANSI/AGMA 9002-B04 or ISO 286-2 keyway.
Taper Lock Bushing mounting screws could be either ” (UNC) or metric (BSW) and care should be taken to choose the proper hub part quantity.
Taper Lock Busings certainly are a product of Baldor Dodge and so are not incorporated with Lovejoy coupling hubs.
Optimum bores size and torque capacities are per Dodge specifications and Lovejoy is not responsible for the accuracy of any of the values listed in accordance with bore size and torque capacity.
Split Taper Bushings. Split-taper bushings are used to attach sprockets, pulleys, and couplings onto shafts. They have a tapered, split body that locks the bushing down onto the shaft, prevents it from slipping during procedure, and transfers more torque.
All reborable bushings are stocked
without sawsplit to facilitatere-machining.
Sawsplit must be manufactured in bushing to permit it to compress for proper gripping of the shaft.
Adapters for TAPER-LOCK bushings are recommended for use where it is more convenient to directly bore than to drill, tap and taper bore hubs to support bushings. The adapter can be a gray iron, taper-bored sleeve whichfits into the directly bore of a hub. The bushing merely fits inside the adapter which can be tapped for the bushing screws. When tightening the locking screws, adapter is definitely expanded against the hub bore contracting the bushing tightly upon the shaft.
Ever-Power offers an comprehensive range of energy absorbing elastomeric isolators that limit the transmission of structure-borne vibration and impacts. Our products are designed for simple make use of and a multitude of orientations in compression, shear and slanted position loading. While economical, these products are constructed with quality rubber, silicone, Neoprene and steel components that allow support for the right amount of load for each software. Filter through our in-depth product report on elastomeric products including foundation mounts, cup mounts, bumpers, bushings and grommets to get the right solution for your application.
Use a tapered or QD bushing from Ever-Power with sheaves, pulleys, sprockets and several other power transmission applications. Flanged quick-disconnect bushings feature a completely split style to greatly help provide easy installation and disassembly. A tapered bushing with directly edges uses an interior screw to help drive the bushing in to the shaft, while a split taper includes a flange and a key on the bushing to greatly help provide more drive.
L – Space required to tighten bushing or loosen to eliminate hub with puller using brief hex key.
M – Space required to remove bushing using screws as jackscrews – brief hex key – no puller reuired.
Listed required hub diameter is for reference only. Severe conditions may require bigger hub and in some cases a slightly smaller sized hub could be satisfactory. Inquire about specific application.
We are able to also supply particular bushings made of other machinable components. Please inquire
External key on most sizes for positive drive and higher torque carrying capabilities
Double-split barrel for positive clamping
Solid flange to maintain concentric bores
Available in “, metric, and spline bores. Bore range between 3/8″ to 10”
Gates Taper-Lock bushings are accustomed to mount pulleys, sprockets and sheaves on shafts. The long lasting stainless construction is well suited for meals and beverage applications or where non-corrosive sprockets are needed to prevent rust.
This Taper-Lock bushing is suitable for use with same-type sheaves, sprockets, and pulleys in power transmission applications that require synchronous rotation. The carbon metal bushing provides power and resistance to wear and includes mounting bolts and washers. Taper-Lock sheaves, sprockets, and pulleys (not really included) are available in a variety of outside diameters to fit this Taper-Lock bushing, permitting the precise selection of the number of drive the teeth or grooves. This bushing is ideal for use in an array of mechanical and electronic adjustable drives, including automotive and printing industries.